Tubular Membrane Filtration Porex, Pemurnian dan Penjernihan Air
TMF Porex Specification :
- Membrane with pore size 0.05, 0.1 , 0.5 micron
- PVDF For Membrane
- HDPE or PVDF For Tube
- Tubular Configuration with 1" or 1/2"
- Housing Materials of PVC, CPVC, SS, all PVDF , other options are request.
- Up to 43 degree Celcius temperature PE, up to 80 degree Celcius temperature PVDF tubes (continuous operating temperature)
- Membrane with pore size 0.05, 0.1 , 0.5 micron
- PVDF For Membrane
- HDPE or PVDF For Tube
- Tubular Configuration with 1" or 1/2"
- Housing Materials of PVC, CPVC, SS, all PVDF , other options are request.
- Up to 43 degree Celcius temperature PE, up to 80 degree Celcius temperature PVDF tubes (continuous operating temperature)
- High Flux (10-15x more than hollow fibres)
- High Solid Concentration (100x more than hollow fibres)
- Excellent Chemical Resistance (pH 1-14)
- Back Washable at Large Pressures (Up to 20 psi easily)
- Minimal Pretreatment Required (Single Step Micro + Ultra Filtration)
- Extremely Durable Construction (tube provides mechanical support)
- Most robust UF membrane available in the market.
- High Flux (10-15x more than hollow fibres)
- High Solid Concentration (100x more than hollow fibres)
- Excellent Chemical Resistance (pH 1-14)
- Back Washable at Large Pressures (Up to 20 psi easily)
- Minimal Pretreatment Required (Single Step Micro + Ultra Filtration)
- Extremely Durable Construction (tube provides mechanical support)
- Most robust UF membrane available in the market.
Major Components in TMF System :
- Waste Water Collection/ Equalization
- pH Adjustment/Reaction Tanks & Chemical Feeds
- Concentration Tank
- TMF Modules
- Backpulses
- Solid Handling
TMF Treatment Process For Electroplating :
Waste Water Treatment With Porex TMF :
Feature | Benefits |
Capable of handling very high solids % but UF quality permeate (NTU<1, TSS, <1 PPM) |
|
Almost 100% Water Recovery | Higher Efficiency system for recovery |
Does not need additional flocculants and/or polymers due to membrane being positive barrier |
|
Highly abrasion & chemical resistant | Able to use in extreme water / liquid treatment |
Easily recover to original flux rate |
|
On/Off System | Better utilization of operator |
Water Treatment With Porex TMF :
Typical TMF System - Replaces Rectifier, Media Filter & UF Membrane In a Single Skid
Typical Applications & Results :
Contaminant | Influent (mg/L) | Membrane Filtrate (mg/L) |
Cadmium - CD | 10 - 30 | < 0.05 |
Chrome - Cr | 10 - 50 | < 0.1 |
Copper - Cu | 20 - 130 | < 0.1 |
Iron - Fe | 5 - 100 | < 0.1 |
Lead- Pb | 1 - 15 | < 0.1 |
Nickel - Ni | 5 - 75 | < 0.1 |
Zinc - Zn | 5 - 130 | < 0.1 |
Fluoride - Fl | 10 - 500 | < 5.0 |
Solids - TSS | 10 - 500 | < 1.0 |